😊 คุณสมบัติสินค้า 😊 - NodeMCU V3 Base on ESP8266 - WiFi 2.4 GHz 802.11 b/g/n Support WPA/WPA2 +20 dBm output power - Integrated low power 32-bit MCU - ใช้ชิพ USB-TTL แบบ CH340G - สามารถใช้ Arduino IDE ในการพัฒนาโปรแกรมได้ - เชื่อมต่อ WiFi 2.4 Ghz - มี GPIO 10 Port รองรับ PWM I2C และ Wire - มี Analog Read 1 Port - Vin 5 Volts - Support STA/AP/STA+AP operation modes - SDIO 2.0 (H) SPI UART I2C I2S IR Remote Control PWM GPIO - Deep sleep power <10uA Power down leakage current < 5uA - Standby power consumption of < 1.0mW (DTIM3) Wake up and transmit packets in < 2ms - Operating temperature range -40C ~ 125C - เหมาะสำหรับการเริ่มต้นพัฒนา Internet of Things (IoT)