drv 8833 dc โมดูลมอเตอร์ไดรฟ์ tb 6612 fng
DRV8833 DC Motor Drive Module Board Replaces TB6612FNG
The DRV8833 motor drive module can directly replace the TB6612 drive module and the pins are basically fully compatible.
Features introduction
Size: 18* 21mm
Input voltage: 2.7 V – 10.8 V
Single H bridge output current: 1.5A can drive 2 DC geared motors.
Built-in overcurrent protection short circuit protection undervoltage lockout and overtemperature protection. With low power sleep mode.
Uses: It can drive DC motors up to 1.5A and 4-wire stepper motors.
Pin description:
ANI1: Logic input control port of AO1 level 0-5V.
AIN2: Logic input control port of AO2 level 0-5V.
BNI1: BO1 logic input control port level 0-5V.
BIN2: BO2 logic input control port level 0-5V.
AO1 and AO2 are 1-channel H-bridge output ports connected to two legs of a DC motor.
BO1 and BO2 are 2-channel H-bridge output ports which are connected to the other two external motors.
GND: Ground.
VM: Chip and motor supply pin voltage range 2.7 V – 10.8 V.
STBY: Grounded or floating chip does not work no output 5V operation; level 0-5V.
NC: Empty foot
We deal in wholesale and retail
Feel free to contact us
#DRV8833 #DC #Motor #Drive #Module #Board #TB6612FNG
