AudioQuest GOLDEN GATE (3.5mm to 3.5mm)

AudioQuest - Golden Gate (Mini to Mini)

Solid Perfect-Surface Copper (PSC) Conductors
Double-Balanced Asymmetrical Geometry
Foamed-Polyethylene Insulation
Gold-Plated RCA Plugs
Metal-Layer Noise-Dissipation System (NDS)
Superior Interconnect with PSC Conductors

For superb sound at an affordable price AudioQuest Golden Gate analog audio interconnect has solid Perfect Surface Copper (PSC) conductors and uses asymmetrical double-balanced geometry delivering lower impedance to the ground.

Golden Gate also features foamed-polyethylene insulation cold-welded gold-plated plugs and a Metal-Layer Noise Dissipation System for powerful sound.

Perfect Surface Copper Conductors

Conductor material quality makes a world of difference in the sound of an audio cable. Since the surface of a conductor has 100% current density at all frequencies the surface most defines the sound quality of the whole conductor. Ultra-smooth Perfect Surface Copper minimizes distortion caused by grain boundaries that exist with any metal conductor.

Solid Core Conductors

Strand interaction is the single greatest cause of distortion in cable and one of the easiest to avoid. Whenever current crosses the oxidized contact between bare strands the signal will be altered. In addition the magnetic fields of the various strands are constantly interacting causing confusion (smearing) and causing the contact pressure between strands to be constantly modulated. AudioQuests solid core conductors are the complete solution to this problem.

AudioQuest Noise-Dissipation System

Noise in the form of RF energy is the mortal enemy of good sound. Our environment is more contaminated with RF than ever before due to the huge proliferation of RF radiating devices like computers and mobile phones.Traditionally RF energy is routed to ground through the use of a shield consisting of either a braided metal or foil. This draining of RF to ground causes a modulation of the ground plane which in turn causes a form of signal modulation.

AudioQuests Noise-Dissipation System greatly reduces the effect of this modulation. Metal used in a passive manner acts as a method of dissipating and reducing the incoming RF. The result is dramatically less modulation of the signal less distortion and better sound.

Cold-Weld System

Making the perfect connection between conductor and connector is not a simple process. There are three accepted ways to make the connection between a cable and its termination. Solder is by far the most common method of connection. Resistance welding is clearly superior to even the best solder. However just as solder introduces an inferior layer of differing material causing distortion and reflections so does welding. The alloy created at the interface of cable and plug is far superior to solder but it is still an undesirable intermediary layer. After so much attention to the quality of the conductor and connector the contact system deserves just as much consideration.

AudioQuests Cold-Weld System solves this problem with a superior connection that insures that the structural integrity of the conductor is kept completely intact. The Cold-Weld System refers to a combination of high pressure at the point of contact and the use of silver impregnated paste.

Foamed Polyethylene Insulation

Golden Gates polyethylene insulation foamed to include as much air as possible provides superior clarity and dynamics.