เซ็นเซอร์วัดอุณหภูมิและความชื้น DHT11 temperature module humidity module

เซ็นเซอร์วัดอุณหภูมิและความชื้น DHT11 temperature module humidity module


Specification:

Supply Voltage: +5 V / 2.5mA
Temperature range :0-50 C error of 2 C
Humidity :20-90% RH 5% RH error
Interface: Digital

pin:

1VccPower supply 3.5V to 5.5V
2DataOutputs both Temperature and Humidity through serial Data
3GroundConnected to the ground of the circuit





#include //----------------dht11 show temp/humid to i2c lcd------------------
#include
#include
//#include

//LiquidCrystal_I2C lcd(0x3F162); // set the LCD address to 0x27 for a 16 chars and 2 line display


#define DHTTYPE DHT11
#define DHTPIN 7

DHT dht(DHTPINDHTTYPE30);

void setup(){
Serial.begin(115200);
dht.begin();
// lcd.begin(); // initialize the lcd
// Print a message to the LCD.
// lcd.backlight();

delay(2500);
lcd.clear();
}

void loop()
{
// Wait a few seconds between measurements.
delay(2000);

float h = dht.readHumidity();
float t = dht.readTemperature();
float f = dht.readTemperature(true);
if (isnan(h) || isnan(t) || isnan(f))
{
Serial.println(Failed to read from DHT sensor!);
return;
}
float hif = dht.computeHeatIndex(f h);
float hic = dht.computeHeatIndex(t h false);
//-------------------------Print to screen COM.?------
Serial.print(Temperature: );
Serial.print(t);
Serial.println( *C );
Serial.print(Humidity: );
Serial.print(h);
Serial.print( % );

//--------------------------------------LCD I2c------
/* lcd.setCursor(00); //บรรทัดที่ 0 ตำแหน่งที่ 0
lcd.print(Temperature:); //print show LCD i2c
lcd.print(t);
lcd.setCursor(01); //บรรทัดที่ 1 ตำแหน่งที่ 0
lcd.print(Humidity:); //print show LCD i2c
lcd.print(h);
delay(250);*/


}