สําหรับ BYD Dolphin 2023-2024 จัดแต่งทรงผมรถด้านหลังแผ่น Trunk กันชนป้องกันสติกเกอร์ตกแต่งอุปกรณ์เสริม

🚗Product Introduction
-- Applicable Models: BYD Dolphin (Right-Hand Drive Version)
-- Product Material: ABS
-- Product Color: Carbon Fiber Texture
-- Installation Method: Double-Sided Adhesive

📝Installation Method
01. Note: Before installation the vehicle body must be kept dry and free of dust oil and wax. When the temperature is below 10 degrees the vehicle body and the adhesive tape on the product must be heated.
02. First wipe the surface of the back sticker with a clean towel and then wipe the place where it will be pasted.
03. Tear off a corner of the protective film on the back of the product leaving the film outside so that the product matches the installation position and then slowly tear off the film and press it.
04. Press hard with your hands until it is firm
05. The glued area should not be exposed to water oil or large dust within 48 hours after the product is installed
⚠Please read the detailed terms and conditions before placing an order. ⚠

📧📧📧Please check the correct address before ordering the address cannot be changed. We apologize for the inconvenience caused.
❗❗❗When you receive the product do not just press the confirmation to receive the product check the product and take a video when you open the box.
If there is a problem with the product please let us know and find the store first. We will be responsible to the customer as soon as possible.